Author Topic: ~ Whoa! You Can Use Beer Cans To Boost Up Your WiFi ~  (Read 538 times)

Offline MysteRy

  • Global Moderator
  • Classic Member
  • ****
  • Posts: 218349
  • Total likes: 23050
  • Karma: +2/-0
  • Gender: Female
  • ♥♥ Positive Thinking Will Let U Do Everything ♥♥
    • http://friendstamilchat.com/
~ Whoa! You Can Use Beer Cans To Boost Up Your WiFi ~
« on: May 29, 2016, 11:50:33 AM »


There is certainly a common issue faced by most of the people regarding their internet connections. Low signals, less speed, server down issue and lot other factors are responsible for hindering your browsing path. If you are using WiFi router and facing same weak signal issue then here, I have got a simple and ultra-cheap tech hack which will help you in boosting up the signals of your Wi-Fi router. Moreover, it makes the clever use of soda or beer cans.

All you need to waste is just a beer/soda can. So, give it a try!



Wi-Fi



A wireless router that helps to share its signals within a particular reach.


How it works?



Wireless router, the device receives the Internet from your broadband connection and broadcasts these signals to the devices like computers and smartphones. To increase the signals reach, antennas are used but still if you face the problem, then try this!


All you need to have is:



Empty beer or soda can - 1 or 2 as per the number of antennas on your router, a pair of scissors, blue tack and a knife.


Empty the can



Make sure no residue remains at the end and after making it empty, wash properly.


Take the ring-pull off the beer can.



As this ring-pull won't be used in process so it's better to remove it.


After washing, use knife to cut the lower end.




Repeat the same with the top of can.



...but this time, make sure not to cut it all but leave one or two-inch space at the top.
You can use scissors as well to have a cut on the bottom part of the empty can.


Cut down along the middle.



Now where you find the space on the opposite side, cut through the center of the can.


Fan it out into a U-shape.



After cutting along, this is the U shape you will get.


Place the openings over the antennas with the help of a blue tack.



Blue tack will help you to keep the openings in place. You can repeat the process if you have more than one antenna. Here there are two.


Watch the video and enjoy super fast Internet speed!